DTM

Audi A5 DTM monocoque sets new standards

Audi press release

Published: Jan 22, 2012, 2:15 PM

Copy link

Share on Viber

Add as a preferred source

The new 2012 Audi A5 DTM

• New safety cell for Audi A5 DTM extremely efficient and safe • Audi Board Member Michael Dick compares Audi A5 DTM and V8 quattro • Rahel Frey at the ADAC Motorsport Show in Erfurt

The new 2012 Audi A5 DTM

Photo by: Audi Communications Motorsport

The new, standardized monocoque for every manufacturer in the DTM has already proven its worth during testing. Homologation of the race car for the DTM season 2012 occurs in a few weeks.

Beginning of a new era:

The innovative safety cell in the DTM is the core component of every DTM race car. The new Audi A5 DTM is also designed and built around the new carbon fiber monocoque which is shown for the first time in photos released to the public. "The DTM sets new standards again with this safety cell," emphasizes Head of Audi Motorsport Dr. Wolfgang Ullrich. "The component is extremely strong, assembled very efficiently and, as a consequence, implemented at such a high level for reasonable cost."

Unusual task:

Michael Dick, Member of the Board of Management for Technical Development at AUDI AG, experienced more than two decades of DTM development at an accelerated pace. At a comparison test the Audi Board Member was invited by Head of Audi Motorsport Dr. Wolfgang Ullrich to get personally behind the wheel of an Audi V8 quattro from 1991 and an Audi A5 DTM for 2012. His impressions can be read in edition 1/2012 of the Audi magazine 'Dialoge'. Further information available at: dialoge.audi.com

Appearance in Thüringen:

Rahel Frey visits the ADAC Motorsport Show in Erfurt next weekend. The Swiss lady is available for autographs and discussions in the afternoon on January 28. The Schaeffler Audi A4 DTM is also on display in Hall 1 at the Automobilmesse Erfurt. Audi won the DTM last year with the powerful 338 kW (460 hp) racing touring car.

Scheider to visit the Motorradwelt Bodensee

Photo by: Satoshi Noma

Appearance at Lake Constance:

Timo Scheider visits the Motorradwelt Bodensee between January 27 and 29. Fans can meet the Audi factory driver during four autograph sessions (Friday 17:30, Saturday 11:15 and 14:15 and Sunday 11:00 hrs) on the Motorradwelt stand at the exhibition center in Friedrichshafen.

Fabulous result for United Autosports: Ryan Dalziel (GB), Alex Popov (YV) and Enzo Potolicchio (YV) finished in a strong third place in the 12-hour race in Abu Dhabi. In their Audi R8 LMS the trio was less than ten seconds behind the race winning car at the checkered flag after twelve hours and 299 laps.

A WORD FROM... STEFAN AICHER

As Head of Vehicle Design you are approaching an exciting phase with the Audi A5 DTM: the homologation looms on the horizon. How effective has the innovative safety cell, which is identical for every manufacturer, proven to be so far? "New standards are set with the cell. The first components were delivered in August, since then each manufacturer has always been delivered another chassis at exactly the same time. We are extremely satisfied after several thousand kilometers of testing."

The monocoque weighs only 126 kilograms

Stefan Aicher

What distinctive qualities does the new cell possess?

"The monocoque weighs only 126 kilograms, the roll-cage 32.5 kilos. At the same time the safety standards have increased dramatically. The design is extremely strong when subject to both frontal, longitudinal crashes and also side impacts. The entire sidewall must withstand a force of 360 kN in the side impact test, this equates to around 36 tones. By way of comparison this value was 80 kN with the A4 DTM. With various crash tests, for example frontally or laterally at 54 km/h, the driver's chest is now exposed to a maximum load of 60g."

The cell is built in an entirely different way than before. What does this mean for the teams?

"The result is a very efficient interaction from the planning via manufacture to use on the track. You notice the excellent cooperation between the three manufacturers. The responsibilities were distributed among the specific brands, which accelerated the sequential development enormously. The teams will notice the longer service and inspection intervals because the monocoque is designed to have a considerably longer life. This is measurable progress aligned with high cost discipline."

We want your opinion!

What would you like to see on Motorsport.com?

Take our 5 minute survey.

- The Motorsport.com Team

Read and post comments

Share Or Save This Story

Copy link

Share on Viber

Previous article Dirk Werner completes BMW driver line-up for DTM series

Next article BMW completes Estoril test

Top Comments

There are no comments at the moment. Would you like to write one?

View More & Comment

Latest news

What's behind "absolute nonsense" Oliver Bearman contract rumours

Formula 1

F1 Formula 1

Mexican GP

34 min

What's behind "absolute nonsense" Oliver Bearman contract rumours

F1 Mexico GP: Follow FP2 with live timing

Formula 1

F1 Formula 1

Mexican GP

1 h

F1 Mexico GP: Follow FP2 with live timing

F1 Mexico GP: Charles Leclerc beats Kimi Antonelli to top FP1

Formula 1

F1 Formula 1

Mexican GP

3 h

F1 Mexico GP: Charles Leclerc beats Kimi Antonelli to top FP1

What Fernando Alonso is getting wrong about F1 driving standards

Formula 1

F1 Formula 1

Mexican GP

4 h

What Fernando Alonso is getting wrong about F1 driving standards

Subscribe and access Motorsport.com with your ad-blocker.

From Formula 1 to MotoGP we report straight from the paddock because we love our sport, just like you. In order to keep delivering our expert journalism, our website uses advertising. Still, we want to give you the opportunity to enjoy an ad-free and tracker-free website and to continue using your adblocker.

You have 2 options:

Become a subscriber.
Disable your adblocker.

Subscribe now Already subscribed? Sign in here

Already disabled your adblocker?
Reload page

Manage Alerts