Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Edition

Australia Australia

Alpine says 2024 F1 car will be “front-to-back” new

Alpine Formula 1 technical director Matt Harman says that next year’s A524 will be new “front-to-back” after the team hit a plateau of development in 2023.

Esteban Ocon, Alpine A523

Alpine logged two third places this season, but slipped from fourth to sixth in the world championship.

The team has accepted that there’s little to be gained from developing the current car, and has focussed instead on wholesale changes for next year's model.

Like other teams it also faces the challenge of creating a 2024 car that will also have to form the basis of the 2025 contender as R&D efforts will be switched towards the new regulations in 2026.

Harman admits that the team didn’t make as much progress with this year's A523 as it had hoped to.

"We didn't we didn't do as well as we did on A522,” said Harman when asked by Motorrsport.com about the development path of this year’s car.

“I think we had a great year [in 2022], that year, I think every time we touched the development of the car, we put load, and we took a lot of weight off the car as well. So there was there was a lot of performance to be had.

“As we've got on that asymptote, and we're getting closer to the sorts of loads that we're seeing now, it's becoming more and more tricky, and you've got to get into more and more detail.

“And that means we have to be a little bit more careful about how we invest our money. And so I don't think this year has been as successful as the 522.

“I think that's why for the following year's car, we've had to really unlock some real estate again, which is why the car is completely new, front-to-back.

“So I think you'll see that up and down the grid, because the car needs to last for a couple of years while we look for the future."

Matt Harman, Technical Director, Alpine F1

Photo by: Alpine

Matt Harman, Technical Director, Alpine F1

Alpine was locked in sixth place in the world championship well before the end of the season, and with little to fight for, it helped the team make an early switch to its 2024 model.

“We knew we weren't quite where we wanted to be this year, we knew that our developments were plateauing a little bit on the car, because of limitations that we had,” said Harman.

“When you know that you're reaching that point, you're better off understanding where you are in the championship, and think to yourself ‘let's move over’, and we moved over reasonably quickly.

“Mechanically, we started the car in week 45 of 2022. The mechanical side of things in terms of chassis and those pieces of equipment and getting a lot of mass out the car, we started that very early. That's something we do very regularly now. But it's probably earlier than we've ever done.”

Harman says a key issue with the A523 was that it was hard to get it into its sweet spot.

“I think its weakness is it needs to operate in a very narrow window,” he said. “And if you go to a circuit where it's has a particular surface condition or a high level of ride content or something, then we can find ourselves in a position where it's more of a struggle, and the drivers don't enjoy the car.

“That's one of its weaknesses at the moment, that it is quite narrow. So we need to broaden it a little bit. We thought we broadened it enough going into the season, but clearly, we didn't. So that's what we're working on."

Read Also:

Be part of Motorsport community

Join the conversation
Previous article How Ferrari responded to a 2023 reality check amid its promising F1 revamp
Next article Max Verstappen to be hit with shocking fee following 2023 F1 success

Top Comments

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Edition

Australia Australia