Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

2019 tech verdict: Mercedes proves its class once again

Join us as we delve into Giorgio Piola’s 2019 archive and bring you insight into the relentless development undertaken by the teams throughout a season in the pursuit of more performance. In today’s gallery we will focus on… Mercedes.

2019 tech verdict: Mercedes proves its class once again

Six years of F1’s hybrid-turbo era and a dozen titles – drivers’ and constructors’ each time – safely stowed in the trophy cabinet. Mercedes’ race form in 2019 was as strong as expected, yet its pre-season didn’t quite kick off as intended – with an aerodynamic revamp required to overcome winter world champions Ferrari.

It rocketed out of the blocks when it mattered, however, winning the opening eight grands prix. Fifteen victories in total, despite the least number of poles per season (10) in those six years, proved its status as the class of the field. And here is how it developed the W10 to be that once again.

Click on the arrows on the images below to scroll through them…

Mercedes-AMG F1 W10 front wing detail
Mercedes-AMG F1 W10 front wing detail
1/18
Mercedes introduced its 2019 challenger with a front wing that differed from everything else on offer. Rather than have the endplate turn outward in an attempt to draw airflow around the front tyre, the endplate actually curved inward.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 front suspension
Mercedes AMG F1 W10 front suspension
2/18
The team ploughed on with its aggressive stance to their upright design for 2019, using a pushrod on upright solution that saw the articulating joint placed quite a distance inboard and hidden behind a nodule (upper arrow). Meanwhile, the regulations designed to hinder the placement of winglets on the brake duct fence fell on deaf ears at Mercedes, as while their size was reduced considerably, they were still there, trying to manipulate the flow of air as it passed by.

Photo by: Giorgio Piola

Mercedes-AMG F1 W10 front wing detail
Mercedes-AMG F1 W10 front wing detail
3/18
Mercedes introduced a more conventional endplate design during pre-season testing, with the endplate set to push airflow out and around the front tyre. As a result of these changes the designers also saw fit to adjust the mainplane and footplate design too.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 side exit comparison
Mercedes AMG F1 W10 side exit comparison
4/18
Cooling has become a critical factor for the teams over the last few years, as they try to negate any aerodynamic inefficiencies, while also keeping an eye temperatures for the power unit. Mercedes used its maximum cooling option in Melbourne, complete with a large louvred panel and an exit from the halo transition, while in Bahrain it only saw fit to use the former.

Photo by: Giorgio Piola

Mercedes W10 front wing endplate comparison
Mercedes W10 front wing endplate comparison
5/18
Striving for extra performance, the team hoped to introduce a new front wing endplate design in China, casting aside the notched upper rear quarter design for a more sinuous trailing edge. However, it fell foul of the wording in the new regulations and was forced to make ad hoc changes in order that it complied with the regulations.

Photo by: Giorgio Piola

Mercedes W10 front wing flap
Mercedes W10 front wing flap
6/18
The ensuing alterations to Mercedes’ front wing required the team to not only make adjustments to the endplate but also resulted in the team having to cut down the outer corner of the upper flap so it wasn’t exposed when viewed from the side.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 serrated rear wing
Mercedes AMG F1 W10 serrated rear wing
7/18
Not for the first time, Mercedes looked to a serrated flap solution on the rear wing in Azerbaijan. Having used such a design on both front and rear wings in recent years, it was perfectly placed to try and get the best from the design once more, trading downforce against drag.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 bracket technical detail
Mercedes AMG F1 W10 bracket technical detail
8/18
Here we can see the aforementioned articulating joint where the W10’s front pushrod meets with its displaced upright extension.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 rear wing detail
Mercedes AMG F1 W10 rear wing detail
9/18
Mercedes arrived in Germany with a package of new parts, the biggest of which was a new rear wing which featured some interesting new design features, including upwash strakes and serrations in the upper rear corner of the endplate.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 front wing detail
Mercedes AMG F1 W10 front wing detail
10/18
At the front end of the car, the team added a small Gurney-style tab on the trailing edge of the footplate

Photo by: Giorgio Piola

Mercedes AMG F1 W10 front suspension detail
Mercedes AMG F1 W10 front suspension detail
11/18
When it comes to suspension, Mercedes has long held superiority over its closest rivals. But with changes coming in 2021 that will require teams to totally rethink their designs, the Silver Arrows has started to lessen its tight grip on the use of hydraulics, returning instead to some more conventional springing methods. As seen here the team have more recently toyed with a mechanically-assisted heave damper, complete with belleville spring washers.

Photo by: motosport.com

Mercedes AMG F1 W10 old bargeboard
Mercedes AMG F1 W10 old bargeboard
12/18
The midriffs of Formula 1 cars have become a complicated affair since the introduction of new rules in 2017 that made the cars a handful of seconds per lap quicker. These rules opened new avenues for the designers to express themselves and many have taken artistic license with them, introducing a slew of ever-more complex bargeboards, floors and sidepod furniture with which to drive performance.

Photo by: Giorgio Piola

Mercedes AMG F1 W10, bargeboard
Mercedes AMG F1 W10, bargeboard
13/18
As part of an update introduced at the Japanese GP, Mercedes looked to dial in the performance that can be garnered from the deflector array and sidepod furniture, with numerous changes to the bodywork focused on improving flow management around the sidepod.

Photo by: Giorgio Piola

Mercedes AMG F1 W10, front brake
Mercedes AMG F1 W10, front brake
14/18
To further enhance the aerodynamic output of the front brake assembly, the team added a row of vortex generators within the brake drums crossover well at the Japanese GP. These alter the flow of air as it passes from the inlet, across the face of the brake assembly and out through the wheel rim.

Photo by: Giorgio Piola

Mercedes AMG W10, rear cooling detail
Mercedes AMG W10, rear cooling detail
15/18
The Mexican GP poses significant challenges for the drivers and engineers alike, given the temperatures and altitude. Mercedes made changes to the rear cooling outlet to accommodate these challenges, as the altitude serves to reduce the amount of drag that’s generated.

Photo by: Giorgio Piola

Mercedes AMG F1 W10, rear duct
Mercedes AMG F1 W10, rear duct
16/18
It is the responsibility of the engineers to find small nuggets of performance within the regulations that their counterparts have not, with Mercedes rear brake and suspension assembly providing one such circumstance.

Photo by: Giorgio Piola

Mercedes AMG F1 W10 rear brakes drum detail
Mercedes AMG F1 W10 rear brakes drum detail
17/18
The triangulation in the upright cavity allows airflow to flow through the assembly and is fed into the gap between the brake drum and the wheel rim, assisting in the management of tyre temperatures.

Photo by: Giorgio Piola

Mercedes AMG F1 W10, front wing
Mercedes AMG F1 W10, front wing
18/18
Mercedes arrived at the last race of the season with one last part to check-off its test programme list – a prototype front wing. The design, which bears the hallmarks of a ‘unloaded’ wing run by the likes of Ferrari, Alfa Romeo and Toro Rosso in 2019, is at the other end of the spectrum compared with what the Silver Arrows has used. Mercedes wanted to get a read on this while it still had some real world test time available, and this could impact its 2020 challenger, even if most of its design has been locked down for some time.

Photo by: Giorgio Piola

Read Also:

shares
comments
Steiner feared Haas duo "not manageable anymore"
Previous article

Steiner feared Haas duo "not manageable anymore"

Next article

Ferrari making "sacrifices" to benefit smaller F1 teams

Ferrari making "sacrifices" to benefit smaller F1 teams
Why Red Bull’s RB17 hypercar can help its F1 team Prime

Why Red Bull’s RB17 hypercar can help its F1 team

On Tuesday, Red Bull laid out its plans to develop and build a new hypercar - the RB17 - penned by Adrian Newey. As the project itself sates Newey as a creative outlet, it also offers Red Bull's Formula 1 team a number of new and exciting avenues to pursue.

What to expect from Mercedes as F1 returns to Silverstone Prime

What to expect from Mercedes as F1 returns to Silverstone

OPINION: The British Grand Prix is a home event for Lewis Hamilton and George Russell, with their Mercedes team based just a few miles away too. But there’s another reason why the Silver Arrows squad is eager to arrive at Silverstone this weekend, which may help it fix its remaining problems with its 2022 Formula 1 challenger .

Inside AlphaTauri’s Faenza F1 factory Prime

Inside AlphaTauri’s Faenza F1 factory

AlphaTauri’s mission in F1 is to sell clothes and train young drivers rather than win the championship – but you still need a cutting-edge factory to do that. Team boss Franz Tost takes GP Racing’s Oleg Karpov on a guided tour of a facility that’s continuing to grow.

Formula 1
Jun 26, 2022
Connecting two of Ferrari's favourite F1 sons: Villeneuve and Leclerc Prime

Connecting two of Ferrari's favourite F1 sons: Villeneuve and Leclerc

Gilles Villeneuve's exploits behind the wheel of a Ferrari made him a legend to the tifosi, even 40 years after his death. The team's current Formula 1 star Charles Leclerc enjoys a similar status, and recently got behind the wheel of a very special car from the French-Canadian’s career.

Formula 1
Jun 24, 2022
How a 30cm metal wire triggered open warfare in the F1 paddock Prime

How a 30cm metal wire triggered open warfare in the F1 paddock

Porpoising has become the key talking point during the 2022 Formula 1 season, as teams battle to come to terms with it. An FIA technical directive ahead of the Canadian Grand Prix and a second stay appearing on the Mercedes cars only served to create a bigger debate and raise tensions further

Formula 1
Jun 23, 2022
Does Max Verstappen have any weaknesses left? Prime

Does Max Verstappen have any weaknesses left?

Having extended his Formula 1 points lead with victory in Canada, Max Verstappen has raised his game further following his 2021 title triumph. Even on the days where Red Bull appears to be second best to Ferrari, Verstappen is getting the most out of the car in each race. So, does he have any weaknesses that his title rivals can exploit?

Formula 1
Jun 22, 2022
How F1's future fuels can shape the automotive sector Prime

How F1's future fuels can shape the automotive sector

In 2026, Formula 1 plans to make the switch to a fully sustainable fuel, as the greater automotive world considers its own alternative propulsion methods. Biogasoline and e-fuels both have merit as 'drop-in' fuels but, equally, both have their shortcomings...

Formula 1
Jun 21, 2022
The breakthrough behind Sainz's best weekend of F1 2022 so far Prime

The breakthrough behind Sainz's best weekend of F1 2022 so far

OPINION: Carlos Sainz came close to winning in Monaco but needed that race’s specific circumstances for his shot at a maiden Formula 1 victory to appear. Last weekend in Canada, he led the line for Ferrari in Charles Leclerc’s absence from the front. And there’s a key reason why Sainz has turned his 2022 form around

Formula 1
Jun 21, 2022