Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

The key tech standouts from F1’s first 2022 test

Formula 1’s pre-season test at Barcelona may have been the first opportunity for teams to get mileage with their 2022 cars, but that did not stop them already introducing upgrades.

The key tech standouts from F1’s first 2022 test

For while many opted to show off only early development parts during their official launches, it is clear that teams are pushing hard to keep adding more downforce before the season gets underway.

McLaren presented us with two versions of its front wing when launching the MCL36: the one in the renders and the one on the physical car that was revealed at the factory.

However, it was fairly obvious that the one on the physical car was the one that would feature, given it was trying to hide some of the details with carbon fibre tape.

Mclaren MCL36 front wing detail
McLaren MCL36 front wing

Whilst the wings do share the dipped central section to help feed airflow to the underside of the nose, the shape and connection of the second element and the body of the nose are slightly different.

Meanwhile, rather than having a relatively similar chord length on each of the elements (as depicted in Giorgio Piola’s illustration), the wing consists of two short chord upper flaps and a larger chord mainplane and secondary flap.

The outboard section of the wing also doesn’t have the abrupt surface discontinuation as was shown on the render (inset on the illustration). Instead, the flaps are angled abruptly to promote more outwash.

This is an area where we will see all of the teams push back against the intent of the new regulations, as they can’t unlearn what they already know, which is that driving flow outboard will improve performance downstream.

McLaren MCL36 floor edge detail

McLaren MCL36 floor edge detail

Photo by: Giorgio Piola

The team also shied away from revealing the tricks it might have up its sleeve on the edge of the floor as there was little point offering too much information to its rivals.

The floor used by McLaren during testing takes what it has learned over the course of the last set of regulations and applies it to the new ones. That means it has to be even smarter if it wants to deploy slots, flaps and scrolls in combination in order to defeat the more restrictive regulations.

The team utilised the opportunity afforded to it within the regulations to use a flapped section that’s detached from the floor itself, with a series of metal stays used to connect it to the floor. This is also orientated in a way that will have an influence on the airflow’s passage.

Meanwhile, the permitted cutout in the floor's edge has been made in such a way that it allows the L-shaped flap to intersect with it.

There’s various surface geometries at play too, in order that the two surfaces can pass off and improve the surrounding flow structures to artificially seal the floor’s edge from the outboard flow that’s attempting to ingress.

Ferrari F1-75 floor
Haas VF-22 rear detail

Ferrari threw its hat into the ring in this regard on day three of the test when the F1-75 was seen with a new floor edge solution. 

Ferrari F1-75 floor detail

Ferrari F1-75 floor detail

Photo by: Giorgio Piola

It was a different approach from the Scuderia, as its solution also featured the cutout permitted in the regulations. However, rather than the elongated flap that’s disconnected from the floor's edge, it favoured a tongue-like flap mounted on the underside instead.

Haas also cut out a section of its floor’s edge and, whilst it won’t be considered as aggressive as some of the other solutions, it’s good to see it has been busy utilising the additional CFD and wind tunnel time it is allowed to use as a compensation for its lack of results.

Mercedes W13 floor comparison
Mercedes W13 stiffened floor

We already knew of the wavy section at the front of Mercedes' floor, as the W13 that was presented to us at the launch also featured the design.

However, whilst the rest of the teams introduced more complex floor edge designs thereafter, introducing discontinuity and flaps to help artificially seal the edge of the floor and reduce rear tyre squirt into the diffuser, Mercedes did not.

The team will undoubtedly bring a fresh batch of parts to Bahrain, some of which will focus more heavily on this region of the car and should alleviate another ill effect of the new regulations that its rivals have also been suffering from: porpoising.

To help manage the situation, teams have all been working on car set-up. But on the last day of the test, Mercedes added a metal stay ahead of the rear tyre to help stabilise the floor.

It needed this extra stability as teams are seeing substantially more load on the floor's edge due to the cars running much lower to the ground than in previous years to exploit ground effect. This in-turn results in the edge of the floor being pulled too close to the track’s surface.

Cooling push

Mercedes W13 high cooling detail
Mercedes W13 forward cooling louvre panel

F1 designers have a few more tools at their disposal this year when it comes to cooling. And whilst some teams have taken to baking them into their designs, with large cooling gills part of the recipe, Mercedes and Red Bull are two of the teams that have resisted the temptation.

Their designs rely on the sidepod and engine cover working without these cooling gills when temperatures are at their lowest, with interchangeable panels with gills and/or louvres favoured instead.

Mercedes had several designs it wanted to try out during the first test in this respect, with a couple variations of the more conventional louvered panel beside the cockpit tested, plus a more expansive panel with gills (illustration, inset) around the powerunit also being put through its paces on day two.

Max Verstappen, Red Bull Racing RB18

Max Verstappen, Red Bull Racing RB18

Photo by: Giorgio Piola

Red Bull, meanwhile, opted for a longer series of cooling louvres in the panel beside the cockpit to assist with cooling. It’s clear though that a similar panel exchange could be made with less louvres in order to provide the requisite cooling.

Putting the brakes on

Red Bull Racing RB18 front brake detail
Red Bull Racing RB18 front brake detail

Sticking with Red Bull, we were afforded the opportunity to see its front brake assembly without the brake drum attached, which threw up some interesting details given the teams have different parameters to consider this season.

Unable to use the larger front brake assembly as a way of dumping airflow out the wheel face under the new regulations, teams are focused more on heat management.

Red Bull is now not only feeding ducting in and away from the caliper, but the set-up seen here in testing suggests the team intends to encapsulate the brake disc for a similar purpose.

Read Also:
shares
comments

Related video

Kvyat says banning of Russian athletes is "unfair"
Previous article

Kvyat says banning of Russian athletes is "unfair"

Next article

What's behind Williams' unique F1 sidepod hole

What's behind Williams' unique F1 sidepod hole
The strange tyre travails faced by F1’s past heroes Prime

The strange tyre travails faced by F1’s past heroes

Modern grand prix drivers like to think the tyres they work with are unusually difficult and temperamental. But, says  MAURICE HAMILTON, their predecessors faced many of the same challenges – and some even stranger…

The returning fan car revolution that could suit F1 Prime

The returning fan car revolution that could suit F1

Gordon Murray's Brabham BT46B 'fan car' was Formula 1 engineering at perhaps its most outlandish. Now fan technology has been successfully utilised on the McMurtry Speirling at the Goodwood Festival of Speed, could it be adopted by grand prix racing once again?

Formula 1
Aug 11, 2022
Hamilton's first experience of turning silver into gold Prime

Hamilton's first experience of turning silver into gold

The seven-time F1 champion has been lumbered with a duff car before the 2022 Mercedes. Back in 2009, McLaren’s alchemists transformed the disastrous MP4-24. And now it’s happening again at his current team

Formula 1
Aug 11, 2022
Why few would blame Leclerc if he leaves Ferrari in future Prime

Why few would blame Leclerc if he leaves Ferrari in future

OPINION: Ferrari's numerous strategy blunders, as well as some of his own mistakes, have cost Charles Leclerc dearly in the 2022 Formula 1 title battle in the first half of the season. Though he is locked into a deal with Ferrari, few could blame Leclerc if he ultimately wanted to look elsewhere - just as Lewis Hamilton did with McLaren 10 years prior.

Formula 1
Aug 9, 2022
The other McLaren exile hoping to follow Perez's path to a top F1 seat Prime

The other McLaren exile hoping to follow Perez's path to a top F1 seat

After being ditched by McLaren earlier in his F1 career Sergio Perez fought his way back into a seat with a leading team. BEN EDWARDS thinks the same could be happening to another member of the current grid

Formula 1
Aug 8, 2022
How studying Schumacher helped make Coulthard a McLaren F1 mainstay Prime

How studying Schumacher helped make Coulthard a McLaren F1 mainstay

Winner of 13 grands prix including Monaco and survivor of a life-changing plane crash, David Coulthard could be forgiven for having eased into a quiet retirement – but, as MARK GALLAGHER explains, in fact he’s busier than ever, running an award-winning media company and championing diversity in motor racing. Not bad for someone who, by his own admission, wasn’t quite the fastest driver of his generation…

Formula 1
Aug 7, 2022
Could F1 move to a future beyond carbon fibre? Prime

Could F1 move to a future beyond carbon fibre?

Formula 1 has ambitious goals for improving its carbon footprint, but could this include banishing its favoured composite material? Pat Symonds considers the alternatives to carbon fibre and what use, if any, those materials have in a Formula 1 setting

Formula 1
Aug 6, 2022
The traits that fuelled Alonso's unexpected Aston Martin F1 move Prime

The traits that fuelled Alonso's unexpected Aston Martin F1 move

Fernando Alonso’s bombshell switch to Aston Martin sent shockwaves through Formula 1, not least at Alpine that finds itself tangled in a contract standoff with Oscar Piastri. Not shy of a bold career move and with a CV punctuated by them, there were numerous hints that trouble was brewing.

Formula 1
Aug 4, 2022