Subscribe

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Australia
Special feature

What F1's 2020 wing designs tell us about each team - Part II

A new rules package introduced last year led to a diverse selection of front wing designs, with even the frontrunners choosing very different designs. Now, after a year of development, we look at what lessons have been taken on board.

Racing Point RP19 front nose

Photo by: Giorgio Piola

Giorgio Piola's F1 technical analysis

Giorgio Piola is the preeminent Formula 1 technical journalist. View our full selection of Giorgio's technical illustrative content

Radical regulation tweaks usually leads to an element of divergence, as each of the teams go in their own direction. However, over time, we usually see convergence on the solution that's perceived to give the best overall performance.

Thanks to Giorgio Piola's illustrations, we're able to get some insight into how the teams have adapted not only their front wings but also their nose designs, recovering some of the downforce and reducing some of the drag penalty naturally created by the introduction of these new regulations.

Racing Point

Racing Point and the rebranded Alpha Tauri team will undoubtedly be looking to improve on their finishing position when the season finally gets underway, but let's take a look at what changes they've made to their front wing and nose solutions since the regulations were altered for 2019.

Racing Point RP19, front wing comparsion

Racing Point RP19, front wing comparsion

Photo by: Giorgio Piola

Racing Point has generally been trying to follow the Red Bull aerodynamic route over the last few years but, with its 2020 challenger it took a U-turn and opted for a Mercedes replica instead.

During 2019 most of its front wing development lay in adjusting the footplate design, altering the length and shape at the rear of its surface on several occasions. Its intent was to alter the vortex shed from here, thus having an effect on the turbulence created by the wheel and tyre behind.

Racing Point RP19 front nose

Racing Point RP19 front nose

Photo by: Giorgio Piola

Having tracked the ongoing trend for an under nose cape, Racing Point joined the fray at the Canadian GP but seemingly weren't wholly convinced by the solution in combination with its existing 'Cobra' nose inlets, a feature the team introduced back in 2015 and had improved upon since.

An entirely new solution appeared for the Belgian GP as it switched to a more simplistic thumb-style nose tip and a set of long slotted wing pillars.

Side by side

Racing Point RP20 front wing
Mercedes W10 front wing


The 2020 nose and front wing assembly, like the rest of the car, is almost a carbon copy of Mercedes 2019 design, with a slender body, large cape, more bulbous nose tip and narrow wing pillars. There are some subtle changes between the two designs though, with the shape of the footplate and the vane atop it both distinguishing features that sets the Racing Point apart from the Mercedes.

AlphaTauri

The name above the door and the colour scheme might be different but it's business as usual for the sister Red Bull team for 2020.

Toro Rosso STR14 front wing

Toro Rosso STR14 front wing

Photo by: Giorgio Piola

The Italian outfit, much like Ferrari and Alfa Romeo, decided upon the unloaded front wing design for 2019 but did so with a certain amount of panache considering its budget. The transition of the flaps to the point where it meets the endplate was more akin to the Ferrari design than the Alfa Romeo, for example.

You'll note that it bucked the nose cape trend too, choosing a simpler thumb tip extension design for the nose and a long set of wing pillars with holes that allow airflow/pressure to bleed from one side to the other.

AlphaTauri AT01 front wing nose

AlphaTauri AT01 front wing nose

Photo by: Giorgio Piola

For 2020, the team made some small changes to its front wing design, as the designers paid attention to the inner flap tips and how the flow off of that region interacts with the Y250 vortex formed below. Married to this is a change to the length of the front wing pillars, which are now much shorter and feature just one slot in their surface.

Be part of Motorsport community

Join the conversation
Previous article The 'track cleaning' lessons that point to a better F1 future
Next article Formula 1 reveals massive drop in 2020 income

Top Comments

There are no comments at the moment. Would you like to write one?

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Australia