All-new GT3 Corvette Z06 unveiled for customer teams in 2024

Making its public debut at Daytona International Speedway ahead of Saturday’s Rolex 24, the Corvette Z06 GT3.R is Chevrolet’s first racecar that fully meets FIA technical regulations for GT3 cars.

The C8.Rs run last season and this season are GTLM/GTE Pro cars converted to GT3 standard for IMSA and WEC competition following the deletion of those two categories.

Design and development of the mid-engine Z06 GT3.R is a collaboration between GM’s Competition Motorsports Engineering and Pratt Miller Engineering.

With an eye specifically toward customer racing, the Z06 GT3.R will be eligible for multiple championships in North America and around the world with a high level of parts and technical support available for its customers.

Corvette Z06 GT3.R

Photo by: Chevrolet

The Corvette Z06 GT3.R will race for the first time as part of the GT Daytona (GTD) Pro category at the 2024 Rolex 24 at Daytona to open next year’s IMSA WeatherTech SportsCar Championship.

“The Corvette Z06 GT3.R breaks new ground for Chevrolet and the Corvette Racing program,” said Mark Stielow, director, GM Motorsports Engineering Competition. “This customer-focused racecar leverages learnings from throughout Corvette Racing’s lengthy and successful history, plus the expertise of our Corvette production design, engineering and powertrain teams.”

“Corvette Racing has been an important influence on the design of Corvette production cars for 25 years,” said Tadge Juechter, executive chief engineer, Corvette. “Corvette production and racing teams worked together closely in development to maximize the benefits of a mid-engine design, sharing lessons learned that set both programs up for all-out performance on the track.”

The Corvette Z06 GT3.R will feature a 5.5-liter, flat-plane crankshaft DOHC V-8 engine which began on-track development in 2019 with the initial testing of the C8.R, ahead of its use in the production Z06. The LT6 engine shares more than 70 percent of its parts with the production Z06 engine, including the crankshaft, connecting rods, cylinder heads, fuel injectors, coils, gaskets and a variety of other sensors.

“Racing continues to play a key role in the development of our production engines,” said Russ O’Blenes, director, Performance and Racing Propulsion Team.

Corvette Z06 GT3.R

Photo by: Chevrolet

“There were valuable lessons learned during the C5-R through C7.R programs that aided in the development of our V8 engines for production and racing — many dealing with efficiency, materials and light-weighting. The flow of information from Corvette Racing to production engineering and back has helped us build race and street-car engines that are fast, reliable and efficient.”

Virtual simulation through Chevrolet’s Driver in the Loop simulator began in early 2021 while the first on-track test of the Z06 GT3.R took place in September 2022, so the Z06 GT3.R will have had a full year of on-track development by the time it reaches customers in the third quarter of 2023.

The Corvette Racing program has scored 122 race victories including 113 in IMSA competition in its 25 years of existence. Those wins have led to 14 manufacturers’ and drivers’ championships and 15 team titles.

The current mid-engine C8.R – the predecessor of the Z06 GT3.R – has won 15 times around the world since its on-track debut in 2020 and dominated the final two years of the IMSA GTLM category, 2020 and ’21.

Corvette Z06 GT3.R

Photo by: Chevrolet

Chevrolet and Corvette Racing is establishing a complete customer support program that will be available to teams running the Z06 GT3.R. According to the press release from Chevrolet, “an at-track parts truck will be a fixture at North American race events starting in 2024 with expansion to overseas support ramping up in the first two years of the Z06 GT3.R program.

“Corvette Racing will carry full spares packages of bodywork and internal components for its customer teams in supported championships. On the technical side, engineers will assist teams with items such as pre-race documentation, including chassis setup and data sharing plus post-event documentation, data analysis, and relative comparisons.

“Full engineering, race strategy and other items also are incremental support options for Corvette Z06 GT3.R customer teams… Corvette Racing and GM Motorsports engineers will be available for remote engineering and operations support.”

For 2024, the IMSA WeatherTech SportsCar Championship will see “up to four Corvette Z06 GT3.R entries with a mix of GTD PRO and GTD teams” while two Corvette chassis will be bound for FIA WEC in hopes of a double entry.

Chevrolet Motorsports will also be evaluating opportunities to be represented in SRO Motorsports including SRO America and the Intercontinental GT Challenge.

Specific team announcements including drivers will be announced at a later date.