Subscribe

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Australia

For NASCAR's engine builders, change isn't cheap

Doug Yates tells Motorsport.com turning races such as Auto Club and Michigan into restrictor plate races could multiply costs.

Motor change for the Richard Childress Racing Chevrolet of Brian Scott

Motor change for the Richard Childress Racing Chevrolet of Brian Scott

Eric Gilbert

Doug Yates
Joey Logano, Team Penske Ford blows an engine at the finish
Piero Ferrari, Ferrari vice-president, and Doug Yates, Yates Racing owner
Greg Biffle, Roush Fenway Racing Ford
Joey Logano, Team Penske Ford
Brad Keselowski, Team Penske Ford
Brad Keselowski, Team Penske Ford
Brad Keselowski, Team Penske Ford
Joey Gase, Go Green Racing Ford smokes
Jimmie Johnson, Hendrick Motorsports Chevrolet, Brad Keselowski, Team Penske Ford and Denny Hamlin, Joe Gibbs Racing Toyota
Joey Logano, Team Penske Ford
Blown engine for Matt Kenseth, Joe Gibbs Racing Toyota
Joey Logano, Team Penske Ford
Doug Yates
Aric Almirola, Richard Petty Motorsports Ford
Engine trouble for Carl Edwards, Roush Fenway Racing Ford
Sam Hornish Jr., Richard Petty Motorsports Ford
Brad Keselowski, Team Penske Ford
Crew members replace the engine of Kyle Busch, Joe Gibbs Racing Toyota
Brad Keselowski, Team Penske Ford
Doug Yates
Greg Biffle, Roush Fenway Racing Ford

As a NASCAR stakeholder, Doug Yates is committed to improving the sport.

But now he has a lot more on his plate than he bargained for.

The second-generation engine builder — and principal of Roush Yates engines — provides power plants for Team Penske, Roush Fenway Racing, Richard Petty Motorsports and other Ford teams in the NASCAR garage. 

Going over the budget

In an effort to do its part, Yates’ company is already more than $3 million over budget compared with this time last year — and the Sprint Cup Series is just two races beyond the halfway point of the season. 

We have spent more money this year than we’ve ever spent before. In six months, we’re up $3 million more than we spent last year in the same amount of time

Doug Yates

Every time NASCAR experiments with the low downforce, high drag or current rules package, there’s a cause and an effect. While the teams worry about spoilers, splitters and radiator pans and Goodyear is tasked with providing the best tires to enhance each setup, engine builders are responsible for the power that carries the cars around the track. 

For engine builders, the process doesn’t happen over night — and the costs are prohibitively expensive.

Restrictor plates at Michigan and Auto Club?

And now, there’s talk that NASCAR could implement restrictor plate engines at Auto Club Speedway and Michigan International Speedway in 2016. 

If anyone thinks a change of that magnitude is as simple as picking up a Daytona or Talladega restrictor plate engine off the shelf and using it at ACS or MIS, think again. 

“We worked on a different package for Kentucky,” Yates said. “When they changed the rules for Kentucky, we worked on a package that we thought was going to be good for lower RPM in the corners and less downforce. Every time they make a change, we have to react to try to do our jobs and win these races. I think we’ve done a good job. 

I understand they (NASCAR) want to make the racing better, but you have to pick your path ... The initiatives are confusing at best, because on one hand they say ‘Save money.’ On the other hand, they’re saying ‘Make changes.’

Doug Yates

“But every time they come up with a new combination, if we have a Daytona/Talladega package and then we have a Fontana/Michigan package and we have another package, it’s just more work and more money to do that. One size won’t fit all. You’re not going to have a Daytona engine that you can take to Fontana.”

Dealing with 2015 rule changes 

NASCAR has already reduced the current engines by approximately 125 hp with the tapered spacers. A restricted engine would decrease the power by another 200 hp — an adjustment not embraced by drivers who have clamored for more throttle response, not less. 

“The rule change they made this year — going from 900 horsepower to 780 — it was the biggest change we’ve ever had. We have spent more money this year than we’ve ever spent before. In six months, we’re up $3 million more than we spent last year in the same amount of time, trying to change things over. 

“At the same time, those guys are trying to tell us they’re saving us money — and restricted engines cost way more money because every horsepower means more. At Daytona and Talladega, we spent money just trying to gain three or four extra horsepower and if every track is like Daytona and Talladega, that’s what we’re going to get into. If it is, it is, but the initiatives are confusing at best, because on one hand they say ‘Save money.’ On the other hand, they’re saying ‘Make changes.’ 

Not an easy process

“I understand they want to make the racing better, but you have to pick your path.”

Whenever NASCAR changes the competition package, Yates must first determine how the new aero configuration will react on the race track. He works closely with his team and the Ford Motor Company to use their simulation tools and develop a durability cycle then programs that cycle onto their AVL transit dynamometer to run a lap. 

Yates must then ascertain the percentage of “wide-open throttle time” throughout the course of a lap during an entire fuel run. At Michigan in two weeks, with the high drag package, Yates estimates the drivers will mat the throttle for approximately one-third of the fuel run, which takes an extreme toll on the engine components but particularly pistons, valve springs, valves, and valve seats due to operating at an elevated temperature over an extended period of time. 

“Our engineers then go to work on what that additional load looks like for all the components in the engine,” Yates said.“We make adjustments based on the new loads, then go to the dynamometer and take combustion data and develop a calibration for the new cycle. After we build a brand new race engine, we attempt a durability test. 

“If the test is successful, we disassemble the engine and measure all components and make a judgement on whether the engine has enough margin to feel comfortable racing.  If the engine doesn’t meet that criteria we go back and make more adjustments to make sure the engine is safe for the race event. If the test is not successful we analyze the failed components and make adjustments accordingly.”

What NASCAR wants

Ultimately, if NASCAR wants a package that produces pack racing and drafting, it will result in drivers holding the throttle wide open around the track and the expense will continue to rise as engine builders scramble to secure durable space-age components that can survive for 400 miles. 

Roush-Yates dedicated two full weeks on the new engine package for the Aug. 16 Michigan race — and the first test was not successful. Yates’ team made the necessary adjustments and came up with a competitive package. But this came on the heels of developing new engines for the Brickyard 400 which also required additional test engines for the practices NASCAR provided the teams (which meant greater expense to Yates, who negotiates a set rate for competitors before the year begins).

NASCAR’s low aero package at Kentucky Speedway last month proved successful for the Ford teams — including Roush Fenway Racing, which has struggled this season. At the Brickyard 400, only the Team Penske Fords finished among the top 10. 

Looking towards Michigan

Michigan has been a strong track for Ford, which has won three of the last six races, including Greg Biffle’s last win in 2013. While many competitors hoped NASCAR would scrap the high-drag package at Michigan after lackluster results at Indy, the sanctioning body elected to stay the course. While Indy’s banking graduates from nine to 12-degrees, Michigan offers 18-degrees in the turns. However, since the two-mile speedway was repaved for the 2012 season, speeds have risen but passing has not, as the new asphalts lends itself to being a one-groove track. 

At Indy, teams experimented with three different gear ratios. Teams are expected to chart a similar course during the Michigan weekend, which will also feature extended practice time. While separate testing could have eliminated trying different gear ratios at the track, it would have also elevated costs. 

Yates remains supportive of NASCAR’s initiative to improve the racing product. While the sanctioning body insists there won’t be changes prior to the Chase, Yates wouldn’t mind seeing the low aero package on the intermediate tracks because “Kentucky was good for us.” 

“We’re getting excited because we’re close to winning races,” Yates said. “But I have to admit, it’s been a challenge.”

Be part of Motorsport community

Join the conversation
Previous article Pocono sweep won't be an easy feat for Martin Truex Jr.
Next article Kasey Kahne damages pit wall in scary accident - video

Top Comments

There are no comments at the moment. Would you like to write one?

Sign up for free

  • Get quick access to your favorite articles

  • Manage alerts on breaking news and favorite drivers

  • Make your voice heard with article commenting.

Motorsport prime

Discover premium content
Subscribe

Edition

Australia