Skip to main content

Recommended for you

Why Oliver Bearman says he must “earn the right” to follow Max Verstappen’s example

Formula 1
Canadian GP
Why Oliver Bearman says he must “earn the right” to follow Max Verstappen’s example

Why WRC 2027 car project is the “most difficult” Toyota has faced

Feature
WRC
Feature
Rally Japan
Why WRC 2027 car project is the “most difficult” Toyota has faced

George Russell on 20-point gap to Kimi Antonelli: “It means nothing”

Formula 1
Canadian GP
George Russell on 20-point gap to Kimi Antonelli: “It means nothing”

The greatest Cup wins of Kyle Busch's historic NASCAR career

NASCAR Cup
Charlotte
The greatest Cup wins of Kyle Busch's historic NASCAR career

Audi F1 engine ‘just lacks power’ – Gabriel Bortoleto

Formula 1
Canadian GP
Audi F1 engine ‘just lacks power’ – Gabriel Bortoleto

Despite manufacturer pushback: DTM approves special solution for Lamborghini

DTM
Zandvoort
Despite manufacturer pushback: DTM approves special solution for Lamborghini

Aprilia MotoGP chief: Pedro Acosta shouldn't have been allowed in restarted Catalan GP

MotoGP
Catalan GP
Aprilia MotoGP chief: Pedro Acosta shouldn't have been allowed in restarted Catalan GP

Haas F1 team boss furious about Esteban Ocon stories online: "F****** hell, is that journalism?"

Formula 1
Canadian GP
Haas F1 team boss furious about Esteban Ocon stories online: "F****** hell, is that journalism?"

Chinese GP: Williams Friday practice

Objectives P1 Validation of a new front wing Starts practice Objectives P2 Set-up work Tyre evaluations Adam Parr, Chairman We had a very full programme today, working through the normal set-up routine and testing some development parts. We've ...

Objectives P1
Validation of a new front wing
Starts practice

Objectives P2
Set-up work
Tyre evaluations

Adam Parr, Chairman
We had a very full programme today, working through the normal set-up routine and testing some development parts. We've made good progress.

Rubens Barrichello

Runs P1: Run 1: New Prime (1 lap, install), Run 2: Used Prime (6 laps, baseline), Run 3: Used Prime (6 laps, aero test), Run 4: Used Prime (4 laps, mechanical set-up)

Runs P2: Run 1: New Prime (6 laps, tyre evaluations), Run 2: Used Prime (12 laps, race set-up), Run 3: Used Prime (5 laps, set-ups), Run 4: New Option (4 laps, tyre evaluations), Run 5: Used Option (3 laps, set-up)

Today went as planned working through set-ups and some aero modifications. We run the engine quite safe on Fridays so our times are expected. Our target tomorrow is to get into qualifying three.

Nico Hulkenberg

Runs P1: Run 1: New Prime (1 lap, install), Run 2: Used Prime (5 laps, baseline), Run 3: Used Prime (5 laps, aero test), Run 4: Used Prime (5 laps, aero test), Run 5: Used Prime (4 laps, mechanical set-up)

Runs P2: Run 1: New Option (5 laps, tyre evaluations), Run 2: Used Option (13 laps, set-ups), Run 3: New Prime (4 laps, tyre evaluations, Run 4: Used Prime (7 laps, set-ups)

It was pretty hard work today. We have a few problems to solve before qualifying tomorrow, but I am confident we will get there. We were running a new front wing on the car which gave us some positive results.

-source: williams

Previous article Malaysia: the hottest race of the year?
Next article Chinese GP: Friday press conference

Top Comments

Latest news